A step by step guide on how to mount the Meetio Room tablet.
If you read this guide you have probably just started to unpack your new Meetio Room tablets (Congratulations!). To help you further we have put together this little guide on how to mount them. Best of luck!
To mount your tablet you need to remove the white back cover.
To remove the cover you have to pull out the screw.
When the screw is removed you can pull off the cover.
Attach the cover to the wall through the three marked holes.
Attach the tablet to the back cover the same way as you removed it. Screw back the screw and you are done!
Meetio Inc
700 SW Fifth Avenue
Portland, OR 97204
USA
Meetio AB
Eric Perssons väg 51
SE-217 62 Malmö
Sweden
Magnus Ladulåsgatan 3
SE-118 65 Stockholm
Sweden
US: (971) 205-6170
Sweden: +46-(0)10-101 95 60
US: (844) 311-7200
Sweden: +46-(0)10-175 49 00